Motorcycle Face Shields

Description

WeeTect motorcycle face shields (WMFS) also names motorcycle helmet shields which is an injection molding optical class 1 face shield for motorcycle face protection complaint with ECE324. It can do surface treatment for anti-fog, anti-scratch and tinted colors. WeeTect is also glad to custom motorcycle helmet face shield with your own design.

WeeTect motorcycle face shields (WMFS) offer superior performance to half or full face motorcycle helmet manufacturers and companies. With a sustainable performance which can increase the longevity of the face shield and significantly reduce costs, WeeTect motorcycle face shields (WMFS) can be easily applied to all types of motorcycle helmet with visor.

WeeTect can customize any injected motorcycle face shields you required.

Advantages:

  • Better anti-moisture feature
  • Better anti-scratch performance
  • Better optical clarity (class 1) with lower distortion
  • Higher impact resistant
  • More cost competitive
  • More custom flexible
More Details

WeeTect Motorcycle Face Shields (WMV) Technical Data

ItemProperty Test Method U/MValue
OpticalUV Resistant (380nm)EN170%99.99%
HazeASTM D 1003%0.37
Fog Free timeECE22.05/ECE324s>22
Fog Free timeFreezing Testsno fogging
MechanicalHardness 1KGISO 178H1
High velocity impactANSI Z87.1 2010ft/s>300
Cross-Cut tape testASTM D 1000NAPass
Elongation, yield  % 7ISO 527%7
Elongation, break ISO 527 % 110ISO 527%110
Tensile stress, yieldISO 527Mpa60
Tensile modulus  MPaISO 527Mpa2300
Flexural strength, yieldISO 178Mpa100
Flexural modulus ISO 178 MPa 2500ISO 178Mpa2500
Izod notched impact, 20 °CISO 180-1AKJ/m²65
PhysicalGravityISO 1183g/cm³1.2
Water absorption, 24 hoursISO 62%0.15
ThermalMold shrinkageISO527%0.5-0.7
Thermal expansionASTM D6961/ °C7×10-5
Vicat Softening Temp., Rate B / 120(base sheet)ISO 306°C150
HDT, 0.45 MPaISO 75/Be°C138
  • WeeTect can customize any injected motorcycle helmet face shields for  you

[widgets_on_pages id=”footer from”]

Scroll to Top